Abstract
A method was developed to determine the vapor concentration of tetrachloroethylene (PCE) at and below its equilibrium vapor-phase concentration, 168 000 microg/L (25 degrees C). Vapor samples were drawn by vacuum into a six-port sampling valve and injected through a jet separator into an ion trap mass spectrometer (MS). This on-line MS can continuously sample a vapor stream and provide vapor concentrations every 30 s. Calibration of the instrument was done by creating a saturated stream of PCE vapor, sampling the vapor with the on-line MS and with thermal desorption tubes, and correlating the peak area response from the MS with the vapor concentration determined by automated thermal desorption gas chromatography mass spectrometry. Dilution of the saturated stream provided lower concentrations of PCE vapor. The method was developed to monitor the vapor concentration of PCE that was sparged from a two-dimensional flow chamber and for determination of the total PCE mass removed during each sparge event. The method has potential application for analysis of gas-phase tracers.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
