Abstract
ABSTRACTTreatment of container washing wastewater (CWW) by using combined electrocoagulation (EC)–electrooxidation (EO) process was studied. CWW contains many organic compounds such as surfactants used in cleaning agents. Wastewater was first treated by EC with iron (Fe) and aluminum (Al) electrodes. The process performance was measured according to the removal efficiencies of soluble chemical oxygen demand (sCOD) and color. Maximum sCOD removal efficiency was found 82% and color removal efficiencies were 95%, 95% and 98% at 436, 525 and 620 nm, respectively, with Fe electrodes under 25 mA/cm2 current density, initial pH of 5 and 120-min operation time. Because of the low sCOD removal efficiency, EO was used as post-treatment process by using boron doped diamond electrode (BDD). sCOD removal efficiency was increased to 89% and color removal efficiencies decreased to 72%, 64%, 71% at 436, 525 and 620 nm, respectively, under 25 mA/cm2 current density, initial pH of 3 and 300-min operation time. This study showed that electrochemical processes caused new complex molecules formation in the CWW, which caused deterioration of water color and limited the process efficiency.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
