Contacting a single nanometer‐sized pinhole in the interfacial oxide of a poly‐silicon on oxide (POLO) solar cell junction

Abstract

AbstractThe electrical current through poly‐Si on oxide (POLO) solar cells is mediated by tunneling and by nanometer‐sized pinholes in the interfacial oxide. To distinguish the two processes, a POLO junction with a measured pinhole density of 1 × 107 cm−2 is contacted by different contact areas ranging from 1 μm2 to 2.5 × 105 μm2, and the temperature‐dependent current–voltage curves are measured for the different devices. Model regressions to the measured curves, their temperature dependence, and the quantized value of contact resistances indicate average numbers of pinholes per device corresponding to the expected pinhole density. For the small contacts, the different transport processes can be studied separately, which facilitates further improvements in respect to the present‐day POLO junctions. Single‐pinhole transport is found for one of the contacts with an area of 1 μm2. Random telegraph noise observed for this device in the current–voltage characteristics shows a high sensitivity to single charges.