Abstract
Superhydrophobic surfaces decorated with macrostructures have attracted extensive attention due to their excellent performance of reducing the contact time of impacting droplets. In many practical applications, the surface is not perpendicular to the droplet impact direction, but the impacting dynamics in such scenarios still remain mysterious. Here, we experimentally investigate the dynamics of droplet impact on inclined ridged superhydrophobic surfaces and reveal the effect of Wen (the normal Weber number) and α (the inclination angle) on the contact time τ. As Wen increases, τ first decreases rapidly until a platform is reached; if Wen continues to increase, τ further reduces to a lower platform, indicating a three-stage variation of τ in low, middle, and high Wen regions. In the middle and high Wen regions, the contact time is reduced by 30 and 50%, respectively, and is dominated by droplet spreading/retraction in the tangential and lateral directions, respectively. A quantitative analysis demonstrates that τ in the middle and high Wen regions is independent of Wen and α, while the range of middle and high Wen regions is related to α. When α < 30°, increasing α narrows the middle Wen region and enlarges the high Wen region; when α ≥ 30°, the two Wen regions remain unchanged. In addition, droplet sliding is hindered by the friction and is affected by the droplet morphology in the high Wen region. Overall, the synergistic effect of the surface inclination and macrostructures effectively promotes the detachment of impacting droplets on superhydrophobic surfaces, which provides guidance for applications of superhydrophobic surfaces.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have