Abstract
Efficient nanopowder processing requires knowledge of the powder’s mechanical properties. Due to the large surface area to volume ratio, nanoparticles experience relatively strong attractive interactions, leading to the formation of micron-size porous structures called agglomerates. Significant effort has been directed towards the development of models and experimental procedures to estimate the elasticity of porous objects such as nanoparticle agglomerates; however, none of the existing models has been validated for solid fractions below 0.1. Here, we measure the elasticity of titania (TiO_2, 22 nm), alumina (Al_2O_3, 8 nm), and silica (SiO_2, 16 nm) nanopowder agglomerates by Atomic Force Microscopy, using a 3.75 upmum glass colloid for the stress–strain experiments. Three sample preparations with varying degree of powder manipulation are assessed. The measured Young’s moduli are in the same order of magnitude as those predicted by the model of Kendall et al., thus validating it for the estimation of the Young’s modulus of structures with porosity above 90 %.Electronic supplementary materialThe online version of this article (doi:10.1007/s11051-016-3500-4) contains supplementary material, which is available to authorized users.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.