Abstract
The contact line between the colloid-rich bulk liquid and an adsorbed thin film in colloid-polymer mixtures (CPM) is studied by means of an interface displacement model. The interface displacement profiles are compared to laser scanning confocal microscopy (LSCM) images. The mixtures consist of poly(methylmetacrylate) (PMMA) colloids and polystyrene (PS) polymers with polymer-to-colloid size ratio q = 1.18. Based on the experimental parameters, the theoretical model predicts a contact angle for colloid-rich liquid droplets adsorbed on glass of θ∞ = 59°, assuming a contact line with infinite radius, R = ∞. When a contact-line curvature correction and a correction for the protein-limit character of the CPM are taken into account, a modest shift is obtained. The refined theory predicts θ≈ 56°. The contact angle determined visually from the LSCM images is θ≈ 30°. The model predicts a three-phase contact-line tension of τ = -1.2 × 10(-12) N (uncorrected) and τ = -2.3 × 10(-13) N (with protein-limit correction), which is physically sound both in sign and magnitude. The line tension influences the contact angle to a small extent due to the contact line curvature. The predicted width of the transition zone between the thin film and the droplet is about 2 μm. The effect of gravity is noticeable as a deformation near the middle of the droplet.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
