Abstract

This paper investigates the nature of the contact between the load transferring surfaces in the roller screw mechanism, i.e., between the screw and roller threads and between the nut and roller threads. The analysis is applied to both planetary roller screws and recirculating roller screws. Prior work has neglected to take a fundamental approach toward understanding the mechanics of the contact between these components, and as a consequence, detailed analysis of aspects such as contact mechanics, friction, lubrication, and wear are not carried out correctly. Accordingly, in this paper, the principle of conjugate surfaces is used to establish contact at the screw-roller and nut-roller interfaces. The in-plane angles to the contact points are derived and it is shown that for the screw-roller interface, the contact point cannot lie on the bodies’ line of centers as has been the assumption in previous papers. Then, based on the curved profile of the roller thread, the radii of contact on the roller, screw, and nut bodies are also derived. Knowledge of the contact point locations is necessary to understand the interaction forces between the key components of the roller screw mechanism. In addition, accurate estimates of the radii of contact are necessary for minimizing the phenomenon of roller migration, a condition that can cause binding between components and eventually lead to the destruction of the mechanism. Last, the principal radii of curvature at the contact points and the angle between the principal axes are derived. These are essential for further development of the contact mechanics, such as the surface stresses, deformations, and consideration of wear.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.