Abstract
The effects of the electron radiation dose and of compatibilizers on the contact angle and surface free energy (SFE) of the composites made of low-density polyethylene (PE-LD), high-density polyethylene (PE-HD), polypropylene (PP), polystyrene (PS), and polyethylene terephthalate (PET) were studied. Use of the high-energy electron radiation with doses up to 300 kGy and of compatibilizers was done to reach better mechanical and adhesion properties of the composites studied and, at the same time, to investigate the possibility of applying of this technique in the processes of polymeric materials recycling. The compatibilizers were the styrene-ethylene/butylene-styrene elastomer grafted with maleic anhydride (SEBS-g-MA), added at the amounts of 5, 10 or 15 wt. %, and trimethylol propane trimethylacrylate (TMPTA), added at the amounts of 1,2 or 3 wt. %. The effects, discussed in the present article, are: enhancement of wettability and increase in SFE of the composites studied. It was found that the contact angle steadily decreased and SFE of the composites increased with the rising dose of the electron radiation and that TMPTA intensified these tendencies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.