Abstract
Construction reorganization, as a type of high-rise construction is part of a basic reorganization cycle in which four phases (phases, states, technological redistribution) are consistently implemented: device, disorganization, reorganization and co-organization. Loft style methodology: the integrated performance indicator organizational and technological operational reliability (OTOR) of the Loft room, which is determined with the help of stellar infographic models, makes it possible to prove arguably the necessity or absence of the need to reorganize the former industrial building. The assessment of the functional zone of the level of the OTOR indicators in the system of the infographic model, in which the number of axes emanating from the point “zero”, corresponds to the number of parameters characterizing a specific functional zone. Valuation parameters are ranked in accordance with their tendency towards centripetal and centrifugal. The field of our research lies in the phase of reconstruction. The determination of the level of OTOR of one functional zone is formed by the construction of two infographic star-shaped models, one of which is constructed by centripetal indicators, and the other by centrifugal indicators.
Highlights
The following are referred to the retreat: [1, 2]: ● the device of ventilated facades with a vertical arrangement of guides and lining of facade cassettes, with porcelain tiles, with lining of fiber cement slabs, with facing from profiled sheets, with facade siding lining; ● the device of cold facades;
The integrated performance indicator organizational and technological operational reliability (OTOR) of the Loft room, which is determined with the help of stellar infographic models, makes it possible to prove arguably the necessity or absence of the need to reorganize the former industrial building
Using the above-described proportion for each indicator of the functional area estimation, determine the level of the OTOR of the evaluation indicators and construct a star infographic model in which the number of axes originating from the point "zero" corresponds to the number of parameters characterizing the specific functional zone
Summary
Hinged systems for finishing buildings and structures are a combination of structures and connections developed on the basis of unification and standardization of their general forms and sizes, spatial planning, organizational, technological and design solutions that imply the possibility of "assembling and disassembling" the structure both locally and Replacement in general.The following are referred to the retreat: [1, 2]: ● the device of ventilated facades with a vertical arrangement of guides and lining of facade cassettes, with porcelain tiles, with lining of fiber cement slabs, with facing from profiled sheets, with facade siding lining; ● the device of cold facades (outer layer - glass panels, and the function of thermal insulation is the construction of the wall of the building, on which the outer layer is fixed with an air gap); https://doi.org/10.10 51/e3sconf /202016402010● the device of the exhaust façade (outer layer - glass packet plus glass, installed at a distance of 15-20 cm from the double-glazed window, with the air gap being used either for air extraction and ventilation of the building, or for heating the fresh air intake);● structural glazing device (a method of combining glass, ceramics and metal in one design using special adhesive silicone sealants);● hinged systems for interior decoration of the building (raised floor, ceiling, walls), etc.;● automated systems for ensuring the integrated security of buildings and structures; ● Loft style appliances; ● installation of attic rooms from materials that do not provide reinforcement of loadbearing structures and foundations; ● Adding an attic without a truss structure and measures to strengthen the foundation with MDM boards (polystyrene foam, penetrated with plaster mesh), which are installed in the required position, covered with concrete plaster on both sides, and then on top - with roofing material. One of the most striking examples of retreatment of a dwelling is the Loft style. Loft style appeared in America in the late 20-ies of the last century and at first in the category of elite housing did not fall. The English word loft, meaning "loft" or "top floor" of an industrial building, gave the name to a specific kind of residential real estate apartments located in the buildings of former factories and plants. In most cases, apartments are located, starting from the second floor or directly in the attic, while the first floor of the building is occupied by office and commercial premises or converted to a studio or gallery. Initially, this style attracted artists and people of creative professions. Large spacious room, high ceilings, huge windows, mixing old (brick or concrete walls, pipes) and new (glass and metal surfaces) materials. After all, it is the industrial elements that are the unique attribute of this style, bringing the "industrial" atmosphere to the image of the apartment.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
