Construction of sandwich-structured C/C-SiC and C/C-SiC-ZrC composites with good mechanical and anti-ablation properties

Abstract

Four kinds of sandwich-structured C/C-SiC and C/C-SiC-ZrC composites with or without a SiC interphase deposited by isothermal chemical vapor infiltration (ICVI), were designed and fabricated by a joint process of electromagnetic coupling chemical vapor infiltration (ECVI) and precursor infiltration and pyrolysis (PIP). The fabricated composites are macroscopically nonhomogeneous materials with low density, high strength and low ablation rate. The interphase and matrix constituents had remarkable effects on the mechanical and ablation properties of these composites. The C/C-SiC composites with an ICVI-SiC interphase exhibited the highest flexural strength of 306.5 MPa. While the C/C-SiC-ZrC composites with the interphase showed the best anti-ablation performance with low linear and mass ablation rates of 0.37 μm/s and 0.04 mg/cm2·s, respectively, after the ablation for 500 s under an oxyacetylene flame test at around 2000 °C.