Abstract

Enriched microbial communities, obtained from environmental samples through selective processes, can effectively contribute to lignocellulose degradation. Unfortunately, fully controlled industrial degradation processes are difficult to reach given the intrinsically dynamic nature and complexity of the microbial communities, composed of a large number of culturable and unculturable species. The use of less complex but equally effective microbial consortia could improve their applications by allowing for more controlled industrial processes. Here, we combined ecological theory and enrichment principles to develop an effective lignocellulose-degrading minimal active microbial Consortia (MAMC). Following an enrichment of soil bacteria capable of degrading lignocellulose material from sugarcane origin, we applied a reductive-screening approach based on molecular phenotyping, identification, and metabolic characterization to obtain a selection of 18 lignocellulose-degrading strains representing four metabolic functional groups. We then generated 65 compositional replicates of MAMC containing five species each, which vary in the number of functional groups, metabolic potential, and degradation capacity. The characterization of the MAMC according to their degradation capacities and functional diversity measurements revealed that functional diversity positively correlated with the degradation of the most complex lignocellulosic fraction (lignin), indicating the importance of metabolic complementarity, whereas cellulose and hemicellulose degradation were either negatively or not affected by functional diversity. The screening method described here successfully led to the selection of effective MAMC, whose degradation potential reached up 96.5% of the degradation rates when all 18 species were present. A total of seven assembled synthetic communities were identified as the most effective MAMC. A consortium containing Stenotrophomonas maltophilia, Paenibacillus sp., Microbacterium sp., Chryseobacterium taiwanense, and Brevundimonas sp. was found to be the most effective degrading synthetic community.

Highlights

  • IntroductionThe biological degradation of lignocellulosic waste materials for subsequent energy production is considered a very promising and sustainable way to supply energy demands

  • Electronic supplementary material The online version of this article contains supplementary material, which is available to authorized users.The biological degradation of lignocellulosic waste materials for subsequent energy production is considered a very promising and sustainable way to supply energy demands

  • In order to obtain bacteria with high lignocellulose degradation capacity, we performed an enrichment experiment [28,29,30] using two sugarcane related substrates—bagasse (B) and straw (St)—and a soil inoculum obtained from a sugarcane plantation, which generated a total of 18 flasks including controls with substrate and no inoculum

Read more

Summary

Introduction

The biological degradation of lignocellulosic waste materials for subsequent energy production is considered a very promising and sustainable way to supply energy demands. Lignocellulose agrowaste, such as straw and bagasse from sugarcane production, can potentially be used in industry, generating a wide range of value-added bioproducts (e.g., biogas, enzymes, antioxidants) and biofuels [1]. This degradation process relies on the breakdown of lignocellulose— composed of hemicelluloses, cellulose, and the recalcitrant aromatic compound, lignin—through chemical, enzymatic, or thermomechanical processes that convert the polysaccharides into their constituent sugars [2].

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call