Abstract
The inner surfaces of polyvinylchloride (PVC) three-channel hollow fiber membranes were successfully modified with poly(methacryloxylethyl benzyl dimethyl ammonium chloride) (PDMAE-BC) in a module scale via remote plasma-induced surface graft polymerization method. After grafting a PDMAE-BC layer, the PVC surface hydrophilicity was improved greatly due to the introduction of large amounts of oxygen and nitrogen containing polar groups onto polymer backbone. This hydrophilicity improvement directly leaded to a high pure water flux and a good antifouling property for the obtained PVC-PDMAE-BC membrane module. Meanwhile, the inner surface morphologies of modified PVC membranes changed slightly and the surface structures were maintained well. The tensile strength, though deceased slightly at the remote plasma-treated stage, showed no significant change during overall grafting process. The obtained PVC-PDMAE-BC membrane module exhibited highly effective and stable antibacterial activities against Escherichia coli. The antibacterial efficacy of PVC-PDMAE-BC membrane module with only 6 fibers can achieve about 96.3% and could be further enhanced by increasing the packing density. The antibacterial membrane module may have great potential applications in actual wastewater treatment and membrane bioreactor (MBR).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.