Construction of a new membrane bed biofilm reactor and yttria-stabilized zirconia for removing heavy metal pollutants.

Abstract

The objective is to design a reactor with a composite new membrane bed biofilm reactor and yttria-stabilized zirconia. We constructed a valuable reactor using response surface methodology (RSM) for process optimization. The present system can remove heavy metal Pb from wastewater using a two-part biofilm reactor: the first reactor, which includes active sludge and media, was investigated; then, the second part, which includes membranes, was made. The amount of heavy metal removed from the effluent was measured at different pH and contact time. The results obtained from this study showed that the optimum conditions for obtaining the optimal removal efficiency separately, with a lead value of 40 mg L-1 for the MBBR reactor, had the highest removal value of 55% and for the membrane with an input lead value of 20 ppm at pH = 12 call time 30 minutes equal to 85%. All analyses in this article have been repeated numerous times to prove the repeatability.