Construction and Central Pattern Generator-Based Control of a Flipper-Actuated Turtle-Like Underwater Robot

Abstract

This paper deals with the construction and control of a turtle-like underwater robot with four mechanical flippers. Each flipper consists of two joints generating a rowing motion by a combination of lead-lag and feathering motions. With cooperative movements of four flippers, the robot can propel and maneuver in any direction without rotation of its main body and execute complicated three-dimensional movements, including ascending, submerging, rolling and hovering. The control architecture is constructed based on a central pattern generator (CPG). A model for a system of coupled nonlinear oscillators is established to construct a CPG and has been successfully applied to the eight-joint turtle-like robot. The CPGs are modeled as nonlinear oscillators for joints and inter-joint coordination is achieved by altering the connection weights between joints. Rowing action can be produced by modulating the control parameters in the CPG model. The CPG-based method performs elegant and smooth transitions between swimming gaits, and enhanced adaptation to the transient perturbations due to nonlinear characteristics. The effectiveness of the proposed method is confirmed via simulations and experimental results.