Constructing “hillocks”-like random-textured absorber for efficient planar perovskite solar cells

Abstract

Efficient planar heterojunction perovskite solar cells (PSCs) with high-quality absorbers are promising for flexible-, semitransparent-, and tandem- photovoltaic applications. However, compared to mesoporous PSCs, planar perovskite absorbers tend to suffer from additional optical losses due to insufficient light harvesting. Accordingly, the design and fabrication of high-quality textured perovskite absorbers are promising to improve device performance. We developed a “hillocks”-like random-textured perovskite (HRT-perovskite) absorber using a facile chlorobenzene (CB) anti-solvent assisted spin-coating approach. The crystallization kinetics and formation mechanisms of CB-induced HRT-perovskite absorbers have been systematically explored, allowing us to gain insights into the role of CB, i.e. an appropriate volume of CB promotes the formation of a porous MAI-PbI2-DMSO intermediate structure. We show that the porous nature of the intermediate film provides sufficient space for lattice reconstruction and structure expansion during crystal growth, thus effectively improving the film and surface/interface quality, and, ultimately, the optoelectronic properties of the perovskite absorber. Moreover, the HRT-perovskite absorber exhibits excellent light-trapping capability and carrier mobility, due to its optimized surface roughness and longitudinally ordered grain boundary distribution. As a result, we obtained efficiencies of up to 20.03% from planar heterojunction PSCs fabricated using ~400 nm thick HRT-perovskite absorbers. The process exhibits very high reproducibility with 20 individual devices fabricated in one batch, achieving an average power conversion efficiency (PCE) of 19.00%. Finally, the whole fabrication process was conducted below 150 ℃, which is appropriate for a wide range of applications, such as flexible- and tandem- photovoltaic devices.