Constructing high-performance nanofiltration membranes using nanofiber supports: Effects of structural stability and polyvinyl alcohol interlayers

Abstract

Nanofiber supports are promising candidates for constructing high-performance nanofiltration (NF) membranes due to their unique interconnected pores and high porosity. Conventional nanofiber supports usually possess excessive surface roughness and low structural stabilities, influencing the formation of polyamide separation layers. However, research on the effects of nanofiber support properties on the NF membrane performances is relatively few. In this study, we systematically evaluated the effects of structural properties of the nanofiber supports on the performances of the fabricated thin-film nanofiber composite (TFNC) NF membranes. The polyimide (PI) support with heat-pressing post-treatments owns a smooth surface and high structural stability due to the welding and compaction of the PI nanofibers. This promoted the formation of a polyamide separation layer with high smoothness and low fouling tendencies. Consequently, the mechanical strength and long-term operation stability of the TFNC-PI NF membrane were much stronger than that of the membranes with polyacrylonitrile (PAN) and PVDF nanofiber supports. Membrane performance analyses illustrated that the TFNC NF membranes possess notable higher water permeance while slight lower salt rejection than the commercial NF membrane. Compared to TFNC-PAN NF membranes (18∼20 L m-2h−1 bar−1), the water permeance of the structurally stable TFNC-PI NF membrane was relatively low (15–16 L m-2h−1 bar−1) due to its smaller surface filtration area and membrane pore size. Further attempts illustrated that constructing interlayers with 2 wt% polyvinyl alcohol (PVA) coating solutions resulted in the formation of clear and regular Turing structures in the polyamide surface layer. It notably enhanced the water permeance of the membrane by ∼30 % without compromising the salt rejection capability of the membrane. This study provides fundamental insights into the effects of nanofiber support properties on NF performance and feasible pathways to construct high-performance TFNC NF membranes.