Abstract
A heat conduction model in a radial-pattern disc by considering non-uniform heat generation (NUHG) is established in this paper. A series of high conductivity channels (HCCs) are attached on the rim of the disc and extended to its center. Constructal optimizations of the discs with constant and variable cross-sectional HCCs are carried out, respectively, and their maximum temperature differences (MTDs) are minimized based on analytical method and finite element method. Besides, the influences of the NUHG coefficient, HCC number and width coefficient on the optimal results are studied. The results indicate that the deviation of the optimal constructs obtained from the analytical method and finite element method are comparatively slight. When the NUHG coefficient is equal to 10, the minimum MTD of the disc with 25 constant cross-sectional HCCs is specifically reduced by 48.8% compared to that with 10 HCCs. As a result, the heat conduction performance (HCP) of the disc can be efficiently improved by properly increasing the number of HCCs. The minimum MTD of the disc with variable cross-sectional HCC is decreased by 15.0% when the width coefficient is changed from 1 to 4. Therefore, the geometry of variable cross-sectional HCC can be applied in the constructal design of the disc to a better heat transfer performance. The constructal results obtained by investigating the non-uniform heat generating case in this paper can contribute to the design of practical electronic device to a better heat transfer performance.
Highlights
Nowadays, with the fast-developing electronic science and technology, the electronic components are faced with new trends of miniaturization, low power consumption, compound design and modularization, which are unprecedented opportunities and tremendous challenges for the electronic industry
The geometry of variable cross-sectional high conductivity channels (HCCs) can be applied in the constructal design of the disc to a better heat transfer performance
Heat conduction has naturally been the prospective strategy for the effective cooling of electronic devices, and one way to enhance heat conduction is arranging high conductivity material
Summary
With the fast-developing electronic science and technology, the electronic components are faced with new trends of miniaturization, low power consumption, compound design and modularization, which are unprecedented opportunities and tremendous challenges for the electronic industry. Thereafter, many scholars performed constructal optimizations of various heat generating bodies to improve their heat conduction performance (HCP), such as rectangular bodies [30,31,32,33], square bodies [34,35,36,37,38,39,40,41], triangular bodies [42,43,44,45], disc-shaped bodies with radial-pattern [46,47] and tree-shaped HCCs [48,49,50,51,52,53,54], respectively. Established a uniform heat generating model in a disc, and obtained the optimal arrangements of tree-shaped HCCs with the objective of MTD. Cetkin and Oliani [55] investigated rectangular constructs with non-uniform heat generation (NUHG), and optimized the shapes of HCCs on account of the minimum MTD.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
