Abstract
Majority carrier depletion has been proposed as a method to suppress the dark current originating from quasi-neutral regions in HgCdTe infrared focal plane array detectors. However, a very low doping level is usually required for the absorber layer, a task quite difficult to achieve in realizations. In order to address this point, we performed combined electromagnetic and electric simulations of a planar $ 5 \times 5 $5×5 pixel miniarray with 5 µm wide square pixels, assessing the effect of the absorber thickness, its doping level in the interval $ {N_D}{ = [10^{14}}{,10^{15}}] \;{{\rm cm}^{ - 3}} $ND=[1014,1015]cm-3, and temperature in the interval 140 K-230 K, both in the dark and under illumination. Looking for a trade-off, we found that the path towards high-temperature operation has quite stringent requirements on the residual doping, whereas a reduction of the absorber thickness helps only moderately to reduce the dark current. Under illumination, interpixel cross talk is only slightly cut down by a decrease of temperature or absorber doping in the considered intervals, whereas it gets more effectively reduced by thinning the absorber.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.