Constitutive models for high-temperature flow behaviors of a Ni-based superalloy

Abstract

The high-temperature deformation behaviors of a typical Ni-based superalloy are investigated by hot compression tests under the strain rate of 0.001–1s−1and temperature of 920–1040°C. The experimental results show that the deformation behaviors of the studied superalloy are significantly affected by the deformation temperature, strain rate and strain. The flow stress increases with the increase of strain rate or the decrease of deformation temperature. The flow stress firstly increases with the strain to a peak value, showing the obvious work hardening behaviors. Then, the stress decreases with the further straining, indicating the dynamic flow softening behaviors. Considering the coupled effects of deformation temperature, strain rate and strain on the hot deformation behaviors of the studied Ni-based superalloy, the phenomenological constitutive models are established to describe the work hardening-dynamic recovery and dynamic softening behaviors. In the established models, the material constants are expressed as functions of the Zener–Hollomon parameter. The established constitutive models can give good correlations with the experimental results, which confirm an accurate and precise estimation of the flow stress for the studied Ni-based superalloy.