Abstract

The flow stress behavior of 10vol. % short carbon fibers reinforced AZ91D composites (Csf/AZ91D) were investigated by hot compression test. The results show the flow stress reach the peak value at small strain and then decrease monotonically until the end of the large strain, which exhibits an obvious dynamic strain softening. The decrease of stress level with deformation temperature increasing or strain rate decreasing can be represented by Zener–Hollomon parameter in a hyperbolic sine equation. By considering the effect of strain on material constants, a modified viscoplastic constitutive equation was established to characterize the dependence of flow stress on the deformation temperature, strain, and strain rate. The stress-strain values calculated by the constitutive equation are in consistent with the experimental results. Applying the constitutive equation, the plastic deformation of Csf/AZ91D composites during the hot compression process were analyzed by finite element simulation. The calculated punch force-stroke curves agree well with the measured ones. The results confirmed that the established constitutive equation can accurately describe the hot plastic deformation behavior of Csf/AZ91D composites, and can be used for the finite element analysis on the hot forming process.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.