Abstract
This paper investigates the change in hull girder failure probabilities and partial safety factors caused by the implementation of the new procedure for direct computation of wave loads recommended by the International Association of Classification Societies (IACS). Differences between new and previous procedures are primarily related to the different associated scatter diagrams, and secondarily due to the assumptions on wave spectrum, wave energy spreading, and ship speed. This study performs a comparative structural reliability analysis of the global longitudinal bending of five oil tankers of different sizes between two procedures for wave load computation. Firstly, failure probabilities are compared, and secondly, modified partial safety factors are proposed, resulting in similar failure probabilities according to two separate procedures. It is found that implementation of the new revision of the IACS procedure for direct computation of wave loads results in a reduction of the minimum required ultimate vertical bending capacity of a ship hull by 10%. In addition to the novel investigation of the safety of oil tankers using a revised wave scatter diagram, this study offers a new rapid method for calculation of extreme vertical wave bending moments based on the regression of the parameters of the Weibull function, used for the long-term probability distribution of wave-induced loads.
Published Version (Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.