Abstract
Numerical simulations are performed to explore leading edge and downstream film cooling enhancement by application of injecting water mist into the air. The accuracy of numerical simulation program for conjugate heat transfer methodology is verified with the C3X gas turbine vane cooled with leading edge and downstream film holes. The Eulerian–Lagrangian particle tracking method is adopted to investigate the two phase film cooling. The effects of various parameters including mist concentration, mist diameter and mist injection location on the improvement of cooling performance are investigated in this paper. The results show that the average wall temperature reduction at mid span increases from 20K to 48K from 1% to 3% mist ratio, the corresponding average heat transfer coefficient reduction increases from 77Wm−2K−1 to 103Wm−2K−1. Mist cooling can decrease the boundary layer temperature without impact on the mainstream temperature and boundary layer thickness. The degree and the location of cooling performance can be controlled by manipulating the sizes of injected water mist. The superimposition of different mist injection locations can be used to further strengthen the two phase cooling performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
