Conformal Adhesion Enhancement on Biomimetic Microstructured Surfaces

Abstract

Inspired by the superior adhesive ability of the gecko foot pad, we report an experimental study of conformal adhesion of a soft elastomer thin film on biomimetic micropatterned surfaces (micropillars), showing a remarkable adhesion enhancement due to the surface patterning. The adhesion of a low-surface-energy poly(dimethylsiloxane) tape to a SU-8 micropatterned surface was found be able to increase by 550-fold as the aspect ratio increases from 0 to 6. The dependency of the adhesion enhancement on the aspect ratio is highly nonlinear. A series of peeling experiment coupled with optical interference imaging were performed to investigate the adhesion enhancement as a function of the height of the micropillars and the associated delamination mechanisms. Local elastic energy dissipation, side-wall friction, and plastic deformations were analyzed and discussed in terms of their contributions to the adhesion enhancement. We conclude that the local adhesion and friction events of pulling micropillars out of the embedded polymer film play a primary role in the observed adhesion enhancement. The technical implications of this local friction-based adhesion enhancement mechanism were discussed for the effective assembly of similar or dissimilar material components at small scales. The combined use of the micro/nanostructured surfaces with the van der Waals interactions seem to be a potentially more universal solution than the conventional adhesive bonding technology, which depends on the chemical and viscoelastic properties of the materials.