Abstract
ABSTRACTConductivity results and 1/f noise (Sav) measurements from some systems with a cellular structure (composites in which small conductor particles embed on the surface of larger and regular insulator particles) are given. The usual DC percolation parameters (φc,t & s) were obtained from fitting the results to the Percolation equations. φc values for the systems have been found to lie in the range 0.01 – 0.07, while both non-universal and close to universal values have been measured for the exponents s and t. In addition, 1/f or flicker noise results on the systems give an additional exponent ω from the relationship Sav/Vdc2 = KRω. For the systems measured so far, the exponent ω is observed to take different values ω1 close to and ω2 further away from the conductor-insulator transition, but on the conducting side (ω > ωc). The very different values (s, t & ω), obtained for the various conducting powders, in the same macroscopic structure, indicates that the way the powders distribute themselves on the insulating particles is a major factor in determining the exponents.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.