Conductive Skeleton-Heterostructure Composites Based on Chrome Shavings for Enhanced Electromagnetic Interference Shielding.

Abstract

Renewable bio-based electromagnetic interference (EMI) shielding materials receive increasing attention undoubtedly. However, there is still a challenge to use raw biomass materials to construct a significant structure through an effortless and environmental route for EMI shielding applications. Herein, for the first time, we demonstrated a hybrid composite of multi-walled carbon nanotube/polypyrrole/chrome-tanned collagen fiber (MWCNT/PPy/CF), which utilized waste chrome shavings as a matrix. X-ray photoelectron spectroscopy reveals that the chromium on the CF has a binding effect on the PPy layer, which endows the tight integration between the CF and PPy layer. After the MWCNT network was loaded on the PPy layer, this ternary structure could provide stable conductive paths and a rich number of polarized interfaces. The MWCNT/PPy/CF composite exhibits superior electrical conductivity (354 ± 52 S/m), higher than PPy/CF (222 ± 38 S/m) and MWCNT/CF (104 ± 11 S/m), owing to the synergy of dual conductive structures. Notably, the shielding effectiveness (SE) value of the MWCNT/PPy/CF composite reaches 30 dB in the X band at a thickness of 0.48 mm. The shielding effectiveness of reflection (SER) (9.1 dB) is similar to that of PPy/CF (8.2 dB), while the shielding effectiveness of absorption (SEA) is significantly improved from 15.3 dB (PPy/CF) to 20.4 dB (MWCNT/PPy/CF) due to the additional coverage of the MWCNT network. This indicates the synergy between the MWCNT network and conductive PPy/CF skeleton. This work provided a method to prepare sustainable and low-cost renewable EMI shielding materials using chrome shavings. Meanwhile, this novel structure combining a conductive skeleton and heterostructure can be considered as a potential application in relevant fields.