Conducting-polymer-based supercapacitor devices and electrodes

Abstract

Supercapacitor electrodes and devices that utilise conducting polymers are envisaged to bridge the gap between existing carbon-based supercapacitors and batteries to form units of intermediate specific energy. This review looks at the major conducting polymer materials, namely, polyaniline, polypyrrole, polythiophene and derivatives of polythiophene, as well as composites of these materials with carbon nanotubes and inorganic battery materials. Various treatments of the conducting polymer materials to improve their properties are considered and comparisons are made with other supercapacitor materials such as carbon and with inorganic battery materials. Conducting polymers are pseudo-capacitive materials, which means that the bulk of the material undergoes a fast redox reaction to provide the capacitive response and they exhibit superior specific energies to the carbon-based supercapacitors (double-layer capacitors). In general conducting polymers are more conductive than the inorganic battery materials and consequently have greater power capability. On the downside, conducting polymers swell and contract substantially on charge and discharge, respectively. Consequently, cycle-life is poor compared with carbon-based supercapacitors which generally only charge via adsorption and desorption of ions (giving typically a few thousand cycles for conducting polymers compared with >500 000 cycles for carbon-based devices).