Condition monitoring based on modified CUSUM and EWMA control charts

Abstract

PurposeThe application of condition-based maintenance on selected equipment can allow online monitoring using fixed, half-fixed or portable sensors. The collected data not always allow a straightforward interpretation and many false alarms can happen. The paper aims to discuss these issues.Design/methodology/approachStatistical techniques can be used to perform early failure detection. With the application of Cumulative Sum (CUSUM) Modified Charts and the Exponentially Weighted Moving Average (EWMA) Charts, special causes of variation can be detected online and during the equipment functioning. Before applying these methods, it is important to check data for independence. When the independence condition is not verified, data should be modeled with an ARIMA (p, d, q) model. Parameters estimation is obtained using the Shewhart Traditional Charts.FindingsWith data monitoring and statistical methods, it is possible to detect any system or equipment failure trend, so that we can act at the right time to avoid catastrophic failures.Originality/valueIn this work, an electro pump condition is monitored. Through this process, an anomaly and four stages of aggravation are forced, and the CUSUM and EWMA modified control charts are applied to test an online equipment monitoring. When the detection occurs, the methodology will have rules to define the degree of intervention.