Condensation heat transfer of binary and ternary mixtures inside multiport tubes

Abstract

This study investigated the condensation heat transfer of pure refrigerants and binary and ternary mixtures inside horizontal multiport tubes with multiple square minichannels. The effects of mass flux, vapor quality, heat flux, channel size, and channel shape were evaluated using pure refrigerants R32 and R1234yf; binary mixtures R32/R1234yf, R32/R1123, R32/R13I1, and R410A; and ternary mixtures R1123/R32/R1234yf and CO2/R32/R1234yf. For pure refrigerants, the heat transfer coefficient in the annular and churn flow regimes decreased monotonically with decreasing vapor quality. By contrast, the heat transfer coefficient in the plug flow regime was higher over a wide vapor quality range because of the thin condensate film formed by surface tension. Smaller channels exhibited higher heat transfer coefficients. The square minichannels exhibited higher heat transfer coefficients than the circular minichannels, except in the region with high mass flux and high vapor quality. For binary and ternary mixtures, the heat transfer coefficients significantly decreased with decreasing mass flux and vapor quality and were strongly deteriorated at lower mass fluxes. Compared with the annular and churn flow regimes, in the plug and slug-annular flow regimes, where heat transfer through the thin liquid film was dominant, the effect of mass diffusion resistance in deteriorating heat transfer was the most pronounced. A new heat transfer model for pure refrigerants inside multiport tubes with multiple rectangular minichannels was developed considering the contributions of vapor shear stress and surface tension. The proposed model was verified using a dataset of pure refrigerants, and a mean absolute percentage error (MAPE) of 11.5% was achieved. Furthermore, a new heat transfer model that considers the heat transfer deterioration of non-azeotropic refrigerant mixtures was proposed, which could predict 508 datapoints with an MAPE of 13.3%.