Abstract
Numerical investigation of steam condensation in a non-circular microchannel is conducted. The conservation equation of mass, momentum and energy have been solved in both phases for various microchannel hydraulic diameters. Different correlations established for condensation flow heat transfer are evaluated. It is found that the correlation of Dobson et al. and Koyama et al. are the closest to the calculated steam condensation average heat transfer. Results are given for different microchannels shapes, aspect ratio, and for various inlet vapor mass fluxes and contact angle. Reducing the microchannel hydraulic diameter from 250 to 80 μm reduces the condensate film thickness and increases the average heat transfer coefficient up to 39% for the same mass flux. The enhancement factor of the heat transfer coefficient reaches 100% by increasing the contact angle from 6 to 15°. The influence of the microchannel shape on the condensation heat transfer is highlighted too. Thus it is seen that the lowest average Nusselt numbers are obtained for the square microchannel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
