CONCERNING THE DEVELOPMENT OF MODERN TEST EQUIPMENT FOR THE EVALUATION OF QUALITY INDICATORS OF FIRE-FIGHTING LAYFLAT DELIVERY HOSES FOR FIRE AND RESCUE VEHICLES

Abstract

Pressure fire hoses are one of the main types of fire-fighting equipment, on the serviceable condition of which depends the operational activities of fire and rescue units and successful firefighting. At present, Ukraine has entered into force with (01.08.2021) the national standard, which contains modern European requirements for assessing the quality of flat-hose fire hoses for fire and rescue vehicles. This standard was developed by the Institute of Public Administration and Research in Civil Defense in the framework of research work "Fire hoses – test methods" and adopted by order of SE "UkrNDNC" from 23.03.2021 № 107. In order to assist in solving this problem, the Institute of Public Administration and Research in Civil Defense put into operation, tested and verified the installation for testing fire pressure hoses, which will check the quality of pressure flat hose for fire and rescue vehicles in accordance with modern European requirements. The installation is intended for tests of pressure fire hoses carried out on the following quality indicators: working, test and burst pressure; abrasion resistance; resistance to hot objects; resistance to open flame. The unit is operated at air temperature from 10 ° С to 25 ° С and relative humidity from 15% to 90%. The installation is a metal table, which consists of two levels (upper and lower). The main part of the tests is to be performed at the upper level with the help of three removable modules. The lower level provides one stationary module on which tests for working, test and burst pressure are carried out. The upper level of the installation is designed to test pressure fire hoses for the following quality indicators: resistance to surface abrasion, resistance to point abrasion, resistance to hot objects and resistance to open flames. For versatility and convenience of work on installation on the top level of a table the possibility of change of modules depending on their need is provided. The lower level of the installation is intended for carrying out tests of pressure fire hoses on quality indicators – working and test pressure, bursting pressure. At the lower level of the metal table is a rectangular metal box, which has a closing lid. During the tests, the sample of the test sleeve is automatically filled with water, which drains after the test. To fix the samples of fire hoses of different diameters (25, 32, 38, 51, 66, 77, 100, 125 and 150) mm, the installation includes special cones and plates.