Abstract
The work performed at the Karlsruhe Nuclear Center for the neutron physics and thermohydraulic design of an advanced pressurized water reactor is described. Investigations have been restricted to the uranium/plutonium fuel cycle and to light water as coolant/moderator. The idea is to replace the core of a Kraftwerk Union 1300-MW(electric) pressurized water reactor (PWR) with a high-converting core with only minor changes in the internals of the reactor pressure vessel. Two reference designs are presented, a homogeneous one and a heterogeneous (seed and blanket) one, which satisfy the requirement of having a negative reactivity coefficient in case of complete water loss from the core region. With the assumed plutonium vector (PWR discharge and 10-yr ex-core time), the conversion ratios for the homogeneous and the heterogeneous reactor are 0.90 and 0.96, respectively. The net electrical plant output is only marginally lower than that of the PWR (1 to 2%). The target discharge burnup of 50000 MWd/ton can be ...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.