Abstract
The Chinese Fusion Engineering Testing Reactor (CFETR) plans to use an ITER-type antenna and couple ∼30 MW ion cyclotron range of frequencies (ICRF) power to the plasma. In this paper, the physical design of a CFETR antenna in the midplane port is carried out. Parameter scans were performed to study the optimized toroidal and poloidal numbers of straps as well as the optimized geometric sizes of the straps. The coupling resistance, power spectrum, maximum voltage in the resonant transmission line of the strap and parallel electric field in the antenna vicinity are used to determine the performance of the studied antennas. It is shown that four poloidal substraps (i.e. quadruplets) and six toroidal strap columns arranged in half of the antenna allows the antenna to have the best coupling capability. To improve the coupling capability of the proposed antenna model, local gas puffing methods, as well as various antenna phasings, are studied. It is indicated that the coupling resistance can be increased by a factor of three for all studied antenna phasings when applying the midplane gas puffing with a gas puff rate in the order of 4 × 1023 el s-1. The toroidal phasings suitable for heating include (0, pi, 0, pi, 0, pi) and (0, pi, pi, 0, 0, pi).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
