Concepts and Experiences for Higher Plant Efficiency With Modern Advanced Boiler and Incineration Technology

Abstract

The efforts for reducing CO2 Emissions into atmosphere and increasing costs for fossil fuels concepts are the drivers for Energy from Waste (EfW) facilities with higher plant efficiency. In the past steam parameters for EfW were requested mainly at 40 bars and 400 °C (580 psi and 752 F). In case of coal fired power plants at the same location as the EfW facilities higher steam parameters at 90 bar, 520 °C (1305 psi, 968 F) have been used for the design of stoker and boiler. This long-term experience with higher steam parameters is the platform for the todays and future demand in higher plant efficiency. Increase in EfW plant efficiency is achievable by increasing temperature and pressure of live steam going along with optimized combustion conditions when using well proven grate technology for waste incineration. On the other hand higher steam parameters result in higher corrosion rates on the boiler tubes and the optimization of the combustion conditions are limited by the burn out quality requirements of slag and flue gas. Advantages and disadvantages have therefore to be balanced carefully. This paper will present different measures for optimized boiler and combustion conditions compared to an EfW plant with live steam at 40 bars and 400 °C (580 psi and 752 F) and 60% excess of combustion air. Plants operated at these conditions have very low maintenance costs created by corrosion of boiler tubes and show performance with very high availability. The following parameters and experiences will be evaluated: - reduction of excess air; - flue gas temperature at boiler outlet; - higher steam parameters (pressure and temperature); - heating surfaces for steam superheating in the radiation boiler section; - steam reheating; - external superheaters using auxiliary fuels. The comparison of the different methods for increasing the efficiency together with resulting technology challenges incorporates the experiences from modern EfW reference facilities built in Naples/Italy, Ruedersdorf (Berlin)/Germany and Heringen/Germany.