Abstract
Abstract Valuable intermediates for solvents, biofuels and biopolymer precursors are produced from levulinic acid (LA). In this study, rice husk (RH) was fractionated using a three-step biorefining approach for LA production: (1) acid pretreatment, (2) alkaline pretreatment and (3) catalytic depolymerization of cellulose. In third step, the H2SO4-acid concentration (Ad), reaction temperature (Td) and reaction time (td) on the LA concentration (CLA), selectivity (SLA) and yield percentage based on the theoretical value (Yt,LA), were investigated. Optimal values for CLA of 27.2 g/L, SLA of 62.2% and Yt,LA of 60.6 mol% were obtained at Ad of 5.0% w/v, Td of 175 °C and td of 75 min. A scenario based on 100 kg of dry RH produced 11.8 kg of LA with a yield of 42.9 mol% based on the theoretical values of the cellulose in the RH, as well as 12.5 kg of xylose, 12 kg of lignin and 2.9 kg of formic acid. Furthermore, the potential route to LA production with the requirement to remove the ash and with a low production of carbonaceous species (∼2.5 kg) was highlighted in this study. These results offer new insight into selective conversion of RH to bio-based products.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.