Computer simulation of radio frequency selective heating of insects in soybeans

Abstract

Radio frequency (RF) treatments have potential as alternatives to chemical fumigation for disinfesting legumes. This study was conducted to investigate the feasibility of RF selective heating of insect larvae in 3kg soybeans packed in a rectangular plastic container (30×22×6cm3) using a 6kW, 27.12MHz RF heating system. A finite element based computer simulation program-COMSOL was used to solve the coupled electromagnetic and heat transfer equations for developing a simulation model. Indianmeal moth larvae were selected as the target insect for experimental validation of the simulation results. Simulated and experimental temperatures of insects and soybeans after 6min RF heating were compared in top, middle, and bottom layers within the container. Both results showed that insect larvae were differentially heated with 5.9–6.6°C higher than host soybeans when RF heated from 25 to 50°C. These results revealed that the heating rate of insects was 1.4 times greater than that of soybeans. The validated simulation results demonstrated that placing the insect on the cold spot of each layer, or horizontally, and large insect size may cause less selective heating within the insect bodies. Dielectric properties of insects may also influence the preferential heating patterns. The selective heating of insects in soybeans may provide potential benefits in developing practical RF treatments to ensure reliable control of insect pests without adverse effects on product quality.