Abstract
Abstract Air jet melt spinning for multifilament system was studied both theoretically and experimentally. Basic equations describing the multifilament system of air jet melt spinning were derived by considering air temperature and velocity of cooling flow surrounding the individual spinlines. Numerical computations of the fundamental equations for air jet melt spinning were carried out for various spinning conditions. Steady-state solutions obtained give the spinline cross sectional area, spinline temperature, spinning tension and spinline velocity. These are described as a function of the distance measured downward from the spinneret. Air jet melt spinning experiments were conducted for poly-(ethyleneterephthalate) (PET) having an intrinsic viscosity of 0.61. The spinning variables were changed mainly in terms of throughput, distance from spinneret point to ejector and air pressure in the ejector. Good correlations between theory and experiment were obtained for the final spinline speed or as-spun fiber denier. Further, the molecular orientation of asspun fiber can be estimated using the computed stretching speed at the ejector point. It was found that the simulation program of multifilament air jet spinning is very useful in finding the appropriate spinning conditions for the industrial spinning process and in estimating fiber properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.