Abstract
An approach based on limited-angle transmission tomography for reconstruction of the sound velocity distribution in the breast is proposed. The imaging setup is similar to that of x-ray mammography. With this setup, the time-of-flight data are acquired by a linear array positioned at the top of the compressed breast that both transmits and receives, and a metal plate is placed at the bottom as a reflector. The setup allows acoustic data acquisition for simultaneous B-mode image formation and the tomographic sound velocity reconstruction. In order to improve the sound velocity estimation accuracy, a new reconstruction algorithm based on a convex programming formulation has been developed. Extensive simulations for both imaging and time-of-flight data based on a 5-MHz linear array were performed on tissues with different geometries and acoustic parameters. Results show that the sound velocity error was generally 1-3 m/s, with a maximum of 5.8 m/s. The radii of the objects under investigation varied from 2 to 6 mm, and all of them were detected successfully. Thus, the proposed approach has been shown to be both feasible and accurate. The approach can be used to complement conventional B-mode imaging to further enhance the detection of breast cancer.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
