Abstract
Using stepped chutes as a structure for controlling flood discharges is applicable for long time. Measuring the depth of flow over that structure is essential for designing of the side walls. The aim of this paper is to determine the free-surface that flows on spillway equipped with non-uniform step sizes. For that purpose, the two-dimensional software package code of ANSYS-CFX has been utilized to run eight configurations of two moderate slopes (1V:2H and 1V:2.5H) and for four different discharges 1≤dc/hs≤2.2 to determine the effect of flow discharges, chute slopes, and step heights on the position of free surface along the structure over non-uniform stepped cascade. The hexahedral grid size of 0.015 m is selected with inflation technique close to the walls. In addition, the renormalized group of k-ε (RNG) turbulence model is implemented and the numerical volume of fluid software is employed. The results show smoother stream for higher discharges, and the free-surface drops when the slope of chutes increases. Moreover, it is found that the step size has insignificant effect on the depth of water. The results of this study are important because they provide new insight in improving the design of stepped spillways. It is recommended to perform more investigations to evaluate their effectiveness in other flow parameters including pressure distribution and energy dissipation rates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.