Computational study of particle in-flight behavior in the HVOF thermal spray process

Abstract

A computational framework is developed for the multiphase flow in a high velocity oxygen-fuel (HVOF) thermal spray coating process with steel powders as the feedstock. The numerical model includes continuum-type differential equations that describe the evolution of gas dynamics and multi-dimensional tracking of particle trajectories and temperature histories in the turbulent reacting flow field. The numerical study shows that the particle temperature is strongly affected by the injection position while the particle velocity is less dependent on this parameter. Moreover, both particle velocity and temperature at impact are strongly dependent on particle size, although the spatial variation of these two variables on the substrate is minimal. It is also found that not all the particles are deposited on the substrate perpendicularly (even if the spray angle is 90°), due to substantial radial fluid velocities near the stagnation point. A statistical distribution of particle velocity, temperature, impinging angle and position on the substrate as well as particle residence time is obtained in this work through independent random tracking of numerous particles by accounting for the distributed nature of particle size in the feedstock and injection position as well as the fluctuations in the turbulent gas flow.