Abstract
The purpose of this research was to present a simulation modelling of a crack propagation trajectory in linear elastic material subjected to mixed-mode loadings and investigate the effects of the existence of a hole and geometrical thickness on fatigue crack growth and fatigue life under constant amplitude loading. For various geometry thickness, mixed-mode (I/II) fatigue crack growth studies were carried out to utilize a single edge cracked plate with three holes and compact tension shear specimens with various loading angles. Smart Crack Growth Technology, a new feature in ANSYS, was used in ANSYS Mechanical APDL 19.2 to predict the cracks’ propagation trajectory and their consequent fatigue life associated with evaluating the stress intensity factors. The maximum circumferential stress criterion is implemented as a direction criterion under linear elastic fracture mechanics (LEFM). According to the hole position, the results demonstrate that the fatigue crack grows towards the hole due to the unbalanced stresses on the hole induced crack tip. The results of this simulation are verified in terms of crack growth paths, stress intensity factors, and fatigue life under mixed-mode load conditions, with several crack growth studies published in the literature showing consistent results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
