Computational prediction of airfoil dynamic stall

Abstract

The term dynamic stall refers to unsteady flow separation occurring on aerodynamic bodies, such as airfoils and wings, which execute an unsteady motion. The prediction of dynamic stall is important for flight vehicle, turbomachinery, and wind turbine applications. Due to the complicated flow physics of the dynamic stall phenomenon the industry has been forced to use empirical methods for its prediction. However, recent progress in computational methods and the tremendous increase in computing power has made possible the use of the full fluid dynamic governing equations for dynamic stall investigation and prediction in the design process. It is the objective of this review to present the major approaches and results obtained in recent years and to point out existing deficiencies and possibilities for improvements. To this end, potential flow, boundary layer, viscous–inviscid interaction, and Navier–Stokes methods are described. The most commonly used numerical schemes for their solution are briefly described. Turbulence models used for the computation of high Reynolds number turbulent flows, which are of primary interest to industry, are presented. The impact of transition from laminar to turbulent flow on the dynamic stall phenomenon is discussed and currently available methods for its prediction are summarized. The main computational results obtained for airfoil and wing dynamic stall and comparisons with available experimental measurements are presented. The review concludes with a discussion of existing deficiencies and possibilities for future improvements.