Computational models for the simulation of turbulent poly-dispersed flows: Large Eddy Simulation and Quadrature-Based Moment Method

Abstract

This work focuses on the development of efficient computational tools for the simulation of turbulent multiphase polydispersed flows. In terms of methodologies we focus here on the use of Large Eddy Simulation (LES) and Quadrature-Based Methods of Moments (QBMM). In terms of applications the work is finalised, in order to be applied in the future, to particle production processes (precipitation and crystallisation in particular). An important part of the work concerns the study of the flow field in a Confined Impinging Jets Reactor (CIJR), frequently used in particle production processes. The first part is limited to the comparison and analysis of micro Particle Image Velocimetry (μPIV) experiments, carried out in a previous work, and Direct Numerical Simulation (DNS), carried out in this thesis. In particular the effects of boundary and operating conditions are studied and the numerical simulations are used to understand the experimental predictions and demonstrate the importance of unavoidable fluctuations in the experimental inlets. This represents a preparatory work for the LES modelling of the CIJR. Before investigating the accuracy of LES predictions for this particular application, the model and the implementation are studied in a more general context, represented by a well-known test case such as the periodic turbulent channel flow: the LES model implementation in TransAT, the code used in this work, is compared with DNS data and with predictions of other codes. LES simulations for the CIJR, provided with the proper boundary conditions obtained by the previous DNS/μPIV study, are then performed and compared with experiments, validating the model in a more realistic test case. Since particle precipitation and crystallization often result in complex interactions between particles and the continuous phase, in the second part of the work particular attention has been paid in the modelling of the momentum transfer and the resulting velocity of the particles (relative to the fluid). In particular the possibility of describing poly-disperse fluid-solid systems with QBMM together with LES and Equilibrium Eulerian Model (EEM) is assessed. The study is performed by comparing our predictions with DNS Lagrangian data in the turbulent channel flow previously described, seeded with particles corresponding to a realistic Particle Size Distribution (PSD). The last part of the work deals with particle collisions, extending QBMM to the investigation of non-equilibrium flows governed by the Boltzmann Equation with a hard-sphere collision kernel. The evolution of the particle velocity distribution is predicted and compared with other methods for kinetic equations such as Lattice Boltzmann Method (LBM), Discrete Velocity Method (DVM) and Grad's Moment Method (GM). The overall results of this thesis can be extended to a broad range of other applications of single-phase, dispersed multiphase and non-equilibrium flows