Abstract

Anaerobic membrane bioreactors (AnMBRs) require biogas recycling to stir the mixed liquid and flush particles away from the membrane surfaces for stable operation. With the fixed gas cycling rate, gas diffuser configuration is an important factor that affects stirring and flushing performance. This study investigated the effect of different outlet diameters on biogas diffusers in AnMBR by using computational fluid dynamics (CFD) to analyze gas–liquid flow in a numerical model constructed based on an experimental AnMBR. According to the CFD results, as the outlet diameter increased from 2.5 to 5.0 mm, the average velocity increased from 0.15 to 0.31 m/s and the average wall shear stress (WSS) increased from 0.21 to 1.10 Pa on the membrane surface. The increase in gas velocity enhances the stirring effect, and the increase in WSS improves the flushing performance. However, when it was further increased to 10.0 mm, the average velocity and average WSS was 0.27 m/s and 0.22 Pa, respectively, indicating that too large an outlet diameter leads to a concentrated gas distribution, which reduces the performance of stirring and flushing. Furthermore, these results provide a basis for optimizing diffuser configuration, which is significant for promoting the practical application of AnMBR in wastewater treatment.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call