Computational Fluid Dynamics Simulation of Hydrodynamics in a Two-Stage Internal Loop Airlift Reactor with Contraction-Expansion Guide Vane.

Abstract

Global circulation and liquid back mixing adversely affect the continuous production of a multistage internal airlift loop reactor. A contraction-expansion guide vane (CEGV) is proposed and combined with a two-stage internal loop airlift reactor (TSILALR) to suppress the liquid back mixing between stages. A computational fluid dynamics (CFD) simulation is conducted to evaluate the performance of the CEGV in the TSILALR. The bubble size distribution and turbulent flow properties in the TSILALR are considered in the CFD simulation by using the population balance model and RNG k-ε turbulence model. The CFD model is validated against the experimental results. The deviations in the gas holdup and mean bubble diameter between the simulation and experimental results are less than 8% and 6%, respectively. The streamlines, flow pattern, bubble size distribution, and axial liquid velocity in the TSILALRs with and without the CEGV at superficial velocities of 0.04 and 0.08 m/s are obtained by CFD simulation. It has been shown that the CEGV generated local circulation flows at each stage instead of a global circulation flow in the TSILALR. The average global gas holdup in the TSILALR with a CEGV increased up to 1.98 times. The global gas holdup increased from 0.045 to 0.101 and the average axial velocity in the riser decreased from 0.314 to 0.241 m/s when the width of the CEGV increased from 50 to 75 mm at the superficial gas velocity of 0.08 m/s.