Abstract
In the current work, the flow characteristics of single isothermal and non-isothermal jets discharging into the upper plenum of a 1/16th scaled-down high-temperature gas-cooled reactor (HTGR) facility were studied. ANSYS Fluent simulations were carried out in the central plane of the jet water flow and the upper plenum for different Reynolds numbers (Re) ranging from 3413 to 12,819. Then, the statistical jet water flow characteristics, such as the mean velocity, root-mean-square fluctuating velocity, Reynolds stress, and the mean temperature in the upper plenum, were computed and presented. The current study’s results showed that the flow maximum velocity occurred far from the jet inlet. Finally, the temperature profiles were plotted, and it was found that the maximum temperature of the flow occurred close to the plume inlet and after that decreased downstream.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
