Computational design of a reliable intermediate-band photovoltaic absorber based on diamond.

Abstract

To reduce the wide bandgap of diamond and expand its applications in the photovoltaic fields, a diamond-based intermediate-band (IB) material C-Ge-V alloy was designed by first-principles calculations. By replacing some C with Ge and V in the diamond, the wide bandgap of the diamond can be reduced sharply and a reliable IB, which is mainly formed by the d states of V, can be formed in the bandgap. With the increase of Ge content, the total bandgap of the C-Ge-V alloy will be reduced and close to the optimal value of an IB material. At a relatively low atomic concentration of Ge (below 6.25%), the IB formed in the bandgap is partially filled and varies little with the concentration of Ge. When further increasing the content of Ge, the IB moves close to the conduction band and the electron filling in the IB increases. The 18.75% content of Ge might be the limitation to form an IB material, and the optimal content of Ge should be between 12.5% and 18.75%. Compared with the content of Ge, the distribution of Ge has a minor effect on the band structure of the material. The C-Ge-V alloy shows strong absorption for the sub-bandgap energy photons, and the absorption band generates a red-shift with the increase of Ge. This work will further expand the applications of diamond and be helpful to develop an appropriate IB material.