Computation of base flow characteristics with uniform blowing

Abstract

Blowing at bluff body base was considered under different conditions and for small amount of blowing this problem was solved using dividing streamline model [1]. The effect of supersonic blowing on the flow characteristics of the external supersonic stream was studied in [2–4]. The procedure and results of the solution to the problem of subsonic blowing of a homogeneous fluid at the base of a body in supersonic flow are discussed in this paper. Analysis of experimental results (see, e.g., [5]) shows that within a certain range of blowing rate the pressure distribution along the viscous region differs very little from the pressure in the free stream ahead of the base section. In this range the flow in the blown subsonic jet and in the mixing zones can be described approximately by slender channel flow. This approximation is used in the computation of nozzle flows with smooth wall inclination [6, 7]. On the other hand, boundary layer equations are used to compute separated stationary flows with developed recirculation regions [8] in order to describe the flow at the throat of the wake. The presence of blowing has significant effect on the flow structure in the base region. An increasing blowing rate reduces the size of the recirculation region [9] and increases base pressure. This leads to a widening of the flow region at the throat, usually described by boundary-layer approximations. At a certain blowing rate the recirculation region completely disappears which makes it possible to use boundary-layer equations to describe the flow in the entire viscous region in the immediate neighborhood of the base section.