Abstract
The large Cable-In-Conduit Conductors (CICC) designed for the magnet coils in the International Thermonuclear Experimental Reactor (ITER), are composed of Nb/sub 3/Sn strand bundles in a Stainless Steel (SS) or Incoloy conduit. Both, the thermal contraction of the strand composite and the conduit material, define the final pre-strain after cooling down and thus affect the strand critical current (I/sub c/). The transverse forces, introduced when charging a coil, in addition affect the overall strain state due to bending and pinching of strands. Recently, periodic bending tests were applied on strand samples without additional axial compressive pre-strain. Here we explore the method of swaging a SS-tube around a strand to imitate the cool-down strain effect of the conduit. The experimental results of the I/sub c/ measurements at 12 T and 4.2 K are presented for a Nb/sub 3/Sn PIT strand with and without swaged SS tube on both Ti-6Al-4V and SS standard ITER sample holder (barrels). The effect of gluing the sample to the barrel is also investigated. The intrinsic strain state of the samples is verified by measurement of the I/sub c/ versus applied strain with the Pacman spring.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
