Compression of frequency-swept microwave pulses using a helically corrugated waveguide

Abstract

Microwave pulse compression is an important area of research in vacuum electronics, with important applications for linear accelerators, RADAR and non-linear testing. The principles and methods of pulse compression differ greatly depending on the application. The concept of producing ultra-high-power nanosecond microwave pulses, using passive sweep-frequency compression, was studied. A novel waveguide with a helical corrugation of its inner surface was used as the microwave pulse compressor. This structure couples a TE/sub 11/ traveling wave with a near cut-off TE/sub 21/ wave producing a region far from cut-off with a large change in group velocity with frequency. A 2.08 meter long copper helical waveguide was used to compress a 67 ns, 5.7 kW frequency-swept pulse from a high power TWT, driven by a swept solid-state source, to a 2.8 ns 68 kW pulse containing /spl sim/50% of the energy of the input pulse. The dispersion characteristics of the helically corrugated waveguide were investigated both experimentally and theoretically. A vector network analyser was used to measure experimentally the dispersion characteristics of complex waveguides and the code MAGIC was used to calculate the dispersion theoretically. Good agreement between experimental results and theoretical predictions was observed.