Abstract
The unique geometry of carbon nanotubes (CNTs) contributes to their excellent rate capability when used as electrode materials for supercapacitors (SCs). However, the practical application of low‐cost commercial CNTs is limited by their moderate specific capacitance due to the relatively low surface area which is around 220 m2 g−1. This limitation can be addressed by applying proper compressive stress to the CNTs, resulting in improved capacitance. The effects of compression on capacitance vary depending on the length and inner diameter of the CNTs, which have been systematically investigated. It has been found that longer and narrower CNTs exhibit more significant improvements in capacitance due to compression. Specifically, under 12 MPa, there is an ≈135% increase in specific capacitance compared to that under 1 MPa, with the optimum value of 68.2 F g−1 at 1 A g−1. An excellent rate capability of 93.5% at 40 A g−1 is also obtained by compression. Furthermore, when an light emitting diode light is powered by a compressed CNT‐based SC, both brightness and lasting time are dramatically enhanced compared to the case without compression. This cost‐efficient strategy for improving the energy storage performance of CNTs may facilitate their practical application as electrode materials for ultrafast supercapacitors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.